- Thermal Spray Bulletin
- Autoren
- Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann
Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann
Prof. Dr.-Ing. Dipl.-Wirt.-Ing. Wolfgang Tillmann, born 1961, studied mechanical engineering (RWTH Aachen) and business administration (FU Hagen). In 1992 he received his doctorate in materials science (RWTH Aachen). He worked as a research assistant and senior engineer at RWTH Aachen University and held various technical and strategic management positions at Hilti AG. Since November 2002, Prof. Dr.-Ing. Dipl.-Wirt.-Ing. Wolfgang Tillmann has held the Chair of Materials Technology at TU Dortmund University.
26 Artikel
Process technology boundary conditions with regard to the coating of internal surfaces on rotationally symmetrical components by means of HVOF/HVAF spraying
Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann, Dipl.-Wirt.-Ing. Leif Gereon Hagen, Dr.-Ing. Ingor Theodor Baumann, M. Sc. Christopher Schaak
Peer-reviewed Papers, 102 - 110
Validation of the velocity/temperature/particle measurements in processes based on plasma, wire arc and HVOF spraying - Status report
Dr.-Ing. Stephan Zimmermann, Prof. Dr. Jochen Schein, Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann, Dipl.-Wirt.-Ing. Leif Gereon Hagen, Dipl.-Ing. Hans-Georg Rademacher
Peer-reviewed Papers, 96 - 101
Characterisation of arc-sprayed corrosion protection coatings post-treated by means of “machine hammer peening”
M. Sc. Alina Timmermann, Dipl.-Ing. Mohamed Abdulgader, Dipl.-Wirt.-Ing. Leif Hagen, M. Sc. Michael P. Milz, Dr.-Ing. Andreas Wirtz, Prof. Dr.-Ing. Dirk Biermann, Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann, Prof. Dr.-Ing. Frank Walther
Peer-reviewed Papers, 46 - 52
Possibilities for the validation of particle velocitymeasurements using the example of HVOF sprayingprocesses
Dr.-Ing. Stephan Zimmermann, Prof. Dr. Jochen Schein, M. Sc. Roman Simon Forster, Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann, M. Sc. Christopher Schaak, Dipl.-Wirt.-Ing. Leif Hagen, Dipl.-Ing. Hans-Georg Rademacher
Peer-reviewed Papers, 38 - 43
Investigation of a procedure for the simulation-basedoptimisation of robot paths for thermal spraying
Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann, M. Sc. Christopher Schaak, M. Sc. Jonas Zajaczkowski, Prof. Dr. Heinrich Müller, Dr. Daniel Hegels, Dipl.-Inform. Marcel Gaspar, Prof. Dr.-Ing. Bernd Kuhlenkötter, M. Sc. Denis Daniel Störkle
Peer-reviewed Papers, 89 - 97
Pretreatment and coatability of additivemanufactured components made by means ofselective laser melting
Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann, Dipl.-Wirt.-Ing. Leif Hagen, M. Sc. Christopher Schaak, Dr.-Ing. Reiner Zielke, Prof. Dr.-Ing. Mirko Schaper, Dr.-Ing. Mehmet Esat Aydinöz
Peer-reviewed Papers, 38 - 45
Investigation into the properties of HVOF-sprayedWC-Co coatings on plane and complex surfaces,manufactured with an evolution-based path planningmethod
Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann, M. Sc. Christopher Schaak, M. Sc. Jonas Zajaczkowski, Prof. Dr. Heinrich Müller, Dr. Daniel Hegels, Dipl.-Inform. Marcel Gaspar, Prof. Dr.-Ing. Bernd Kuhlenkötter, M. Sc. Denis Daniel Störkle
Peer-reviewed Papers, 95 - 102
Influence of the spraying distance between the shroudoutlet and the substrate surface on the pseudoelasticbehaviour of NiTi twin wire arc sprayed coatings
Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann, Dipl.-Ing. Mohamed Abdulgader, Prof. Dr.-Ing. Michael Pohl, Dipl.-Ing. Julia Baak
Peer-reviewed Papers, 32 - 37
Optimisation of the spray parameters tocoat valve shafts by employing fine Cr3C2-25NiCrpowder in the HVOF spray process
Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann, Dipl.-Ing. Weifeng Luo, Dr.-Ing. Ingor Theodor Baumann, Prof. Dr. Zezhou Feng, B. Eng. Yaping Ji, M. Eng. Yanling Feng
Peer-reviewed Papers, 133 - 140
Introduction of a day effect estimator in order toimprove the prediction of particle properties in anHVOF spraying jet
Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann, Prof. Dr. Sonja Kuhnt, Dipl.-Ing. Birger Hussong, Dipl.-Stat. André Rehage, Dipl.-Math. Nikolaus Rudak
Peer-reviewed Papers, 132 - 139
Robot-assisted, near-net-shape coating of complexsurfaces with thermally sprayed WC-based anti-wearsurfacing coats
Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann, Prof. Dr.-Ing. Bernd Kuhlenkötter, Dr.-Ing. habil. Evelina Vogli, Dr.-Ing. Ingor Theodor Baumann, Dipl.-Inform. Carsten Scheele, Dipl.-Phys. Ing. Benjamin Krebs
Peer-reviewed Papers, 44 - 53
