Issue 1 (2011) Volume 4

Issue Highlights:

Implementation of new mounting conceptsfor mechatronics using cold-gas-sprayed coats

Within the framework of the presented project, new mounting concepts for power electronics were implemented by applying Al/Cu coat systems to insulators by means of cold gas spraying (CGS). Fabrication technologies for t...

Influence of the carbide feedstock size on the tribologicalcharacteristics of rolled and ground FTCFeCSiMncoatings

The tribological properties of thermally sprayed coats are highly dependent on the utilised spraying processes, parameters and the feedstock material. In addition to the chemical composition of the feedstock, the wear re...

Forming of thermally coated sheets forthe production of plastic-metal hybrids withpositive-locking joints

Light-weight, cost-favourable and high-strength hybrid components can be produced by combining metal and plastic materials in one component. The integrated forming of the sheet in the injection moulding tool using the pr...

Content

6 / 34 Articles:

New concepts for thermally coated piston rings inmodern two-stroke internal combustion engines

Dipl.-Ing (FH) M. Eng. Marc-Manuel Matz, Dr.-Ing. Marcus Kennedy

Specialist Article, 20 - 24

SUMEBore - Coating solution for cylinderliner surfaces

Dr.-Ing. Peter Ernst, Dipl.-Ing. (FH) Bernd Distler, Gérard Barbezat, Dipl.-Wirt.-Ing. René Schmitt, Dipl.-Ing. Stefan Weltz

Specialist Article, 26 - 29

Cylinder liner technology with a reduced frictionloss for aluminium cylinder crankcases withan optimised weight

Dr.-Ing. Stephan Beer, Dr.-Ing. Christian Klimesch

Specialist Article, 30 - 33

Process chain for the manufacture of thermallycoated cylinder bores

Dipl.-Ing. (FH) Gerhard Flores

Specialist Article, 35 - 39

High-performance cylinder bore surfaces ofaluminium crankcases

Dr. Bernhard Gand

Specialist Article, 40 - 45

125 years of the automobile - Daimler's LDS cylindertrack opens up a new chapter in engine construction

Dr. Karl Holdik, Dr. Martin Hartweg, Manuel Michel, Roberto De Zolt, Jens Böhm, Dr. Frank Spennemann

Specialist Article, 46 - 50

Issue 1 (2011) Volume 4

Issue Highlights:

Implementation of new mounting conceptsfor mechatronics using cold-gas-sprayed coats

Influence of the carbide feedstock size on the tribologicalcharacteristics of rolled and ground FTCFeCSiMncoatings

Forming of thermally coated sheets forthe production of plastic-metal hybrids withpositive-locking joints

New concepts for thermally coated piston rings inmodern two-stroke internal combustion engines

SUMEBore - Coating solution for cylinderliner surfaces

Cylinder liner technology with a reduced frictionloss for aluminium cylinder crankcases withan optimised weight

Process chain for the manufacture of thermallycoated cylinder bores

High-performance cylinder bore surfaces ofaluminium crankcases

125 years of the automobile - Daimler's LDS cylindertrack opens up a new chapter in engine construction

More content

Thermal Spray Bulletin

Issue 1 (2024)

Thermal Spray Bulletin

Issue 2 (2023) Volume 16

Thermal Spray Bulletin

Issue 1 (2023) Volume 16

DVS Media GmbH

More Journals

Newsletter subscription